Nova Ets supplies gps and gsm dual band antennas , for internal use, dash mount or windscreen type High sesitivity for consumers built using military spec cables.GPS antennas for the automotive industry for immediate supply for the booming GPS markets.

INTRODUCTION - SECURITY SYSTEMS - SATELLITE NAVIGATION SYSTEMS(GPS)

ELECTRONIC MANUFACTURING SERVICES (EMS) - COMPONENTS - CONTACT US

SATELLITE NAVIGATION SYSTEMS ( GPS )

BLUE TOOTH GPS

TTM7 ROVER - CAR NAVIGATION SYSTEM

PERSONAL TRACKER

GPS ANTENNAS

GPS/ GSM ANTENNAS

GPS MODULES

TTM7 ROVER -CAR NAVIGATIONS SYSTEM

AVL ------AVL SET UP ----- GEO FENCING ------

GEO FENCING DOCUMENT

There are 2 options for GEO fencing 1. When you park your vehicle and the GEO fencing input is low then your vehicle will be automatically GEO fenced to that location in about 30 seconds (default) and the GEO fencing LED starts flashing! If your vehicle is moved from that location (with GEO fencing input low) then the tracking unit will automatically send an SMS message with alarm status code = 044 (if no other alarm is activated at that time). This combination code can only be sent if the vehicle is moved from the GEO fenced area. 2. When you define a GEO fenced area and the vehicle leaves the GEO fenced area then an SMS message is sent with the alarm status code = 0@0 (if no other alarm is activated at that time). Geo Fenced area setup: You can configure a Geo Fenced area. You can configure the settings so that a vehicle has to stay within that Geo Fenced area or must stay out of the Geo Fenced area. When activated an SMS message can be sent back to base, as well the alarm output can be activated to disable the vehicle.

Camera GPS locations (code 37,1 and code 37,2): Our TTM/ROVER AVL unit has 100 GPS locations that can be used for 2 functions. 1. As warning device when a vehicle enters an area where a fixed speed camera is installed. To use this function you must know the GPS (lat - long) location(s) for the fixed speed cameras installed. If the TTM/ROVER speed camera function is enabled and you have the speed camera locations loaded then whenever you come closer then 300 meters from these locations the SOS output will be activated (low). A small buzzer connected to this output can warn you that there is a speed camera installed. Once your distance is more then 300 meters away from the location the SOS output automatically deactivates .

2. As an automatic reporting system when a vehicle enters and leaves a defined 'GEO'fenced location. The following picture shows how this works .

Up to 200 locations can be configured. Sample setup and operation: SMS setup Lets say we have 3 locations where we need to know when the vehicle enters or leaves these locations. The locations must be entered as hex code and in 'ddmm.mmmm' format. Example: 3723.2475 hex format to send -> 2517184B or 0456.5580 hex format to send - > 04383750. Latitude and longitude are always positive numbers. The last entry in the table must be hex FFFFFF. Command code sample: 05*827,38,00,414141,424242,38,01,434343,444444,38,02,454545,464646,38,03,FFFFFF,FF FFFF,0 This will setup 3 locations: First location : latitude = 414141 (hex) and longitude =424242 (hex) Second location : latitude = 434343 (hex) and longitude =444444 (hex) Third location : latitude = 454545 (hex) and longitude =464646 (hex) Then we can enable the function with command code: 05*827,37,2,0 If the vehicle enters the second location, an email message will be sent (IN 434343,444444). When the vehicle leaves the second location, another email message will be .

sent (OUT 434343,444444). The message sent when a vehicle leaves a location is delayed about 30-40 seconds to make sure that the vehicle has left the location. Com port setup Use ttm7setup.exe to upload location table via serial port. GPRS setup Use server.exe to upload location table via GPRS.