Satellite Navigation System - low cost, and high tech production by Nova Ets .GPS combined GSM technology has been applied to Automotive Vehicle Locations (AVL) for more than 10 years. Most of system has been used for Business-to-Business market. Besides, AVL technology is also used in Telematics market especially in car security

INTRODUCTION - SECURITY SYSTEMS - SATELLITE NAVIGATION SYSTEMS(GPS)

ELECTRONIC MANUFACTURING SERVICES (EMS) - COMPONENTS - CONTACT US

SATELLITE NAVIGATION SYSTEMS ( GPS )

BLUE TOOTH GPS

TTM7 ROVER - CAR NAVIGATION SYSTEM

PERSONAL TRACKER

GPS ANTENNAS

GPS/ GSM ANTENNAS

GPS MODULES

TTM7 ROVER -CAR NAVIGATIONS SYSTEM

AVL ------AVL SET UP ----- GEO FENCING ------

GPS combined GSM technology has been applied to Automotive Vehicle Locations (AVL) for more than 10 years. Most of system has been used for Business-to-Business market. Besides, AVL technology is also used in Telematics market especially in car security . Rover has designed with SoC (System On Chip) solution to bring more reliability and stability to the over whole performance Indeed, Rover has been ranking as premium car alarm system by insurance companies across the world.Rover can also can be applied as self-monitoring just simply hook up with control center for real time tracking, two way text/voice communication with car drivers, vehicle monitoring, Vehicle dispatching, Drive route recording , more and more.

For Rover TTM7 20-12-04 Start up the file ttm7setup.exe

Select Com port

Upload configuration from Rovert

View configuration

Overview

Settings	Description
Enable By	Setup how unit activate from sleeping mode (off line)
Base phone number	Setup the control center base station number
Geo fencing delay	Setup the time delay for geo fencing
Geo fencing sensitivity	Setup the speed to activate geo fencing
Alarm activation	Setup the type of alarm input
Alarm input delay time	Setup time delay for alarm input
Power failure delay time	Setup time delay for external power failure
GPS reading interval	Setup time interval to save locations in memory
SOS function	Setup how SOS output activate
Auto report files	Setup the 200 locations email report
Panic input	Disable or enable panic button input
SMTP server IP address	SMTP server for send email
Credits left	Disable or enable all out going message
Static IP address for UDP	Setup static IP address for sending general HUDP package to
AUX2 input delay time	Setup the time delay trigger for AUX2
UDP destination port	Setup the port for sending HUDP package to

UDP packet identification	Unit's ID which will send with HUDP
Status send every 24 hours	Enable or disable of status message sent once every day
SMS tracking interval online	For SMS only and GRRS only mode and rover is activating.
SMS tracking interval offline	For SMS only and GRRS only mode and rover is in sleep mode
Real time GPRS tracking interval	For SMS+GPRS mode
Real time GPRS saving interval	For SMS+GPRS mode
Working mode	Switch between SMS only mode, GPRS only mode andSMS+GPRS mode
Stop real time tr. When in sleep mode	To disable the offline tracking
Email address send to	For the auto report via Email
Email send from	Setup an email address, which is registered with SMTP server.
GPRS dial up number	For setup GPRS connection
APN (access point name)	For setup GPRS connection
GPRS login name	For setup GPRS connection
GPRS password	For setup GPRS connection
Geo fencing Area setup	Rectangle geo fencing area setting
Speed limit	Over the speed limit will send out message
Speed limit activation time	Time of the speed keep over speed limit
Geo fencing activation	When setup Geo fencing area, how to react on the geo fencing
UDP OS update port	Setup different port for firmware update via GPRS
Existing password	To connect to unit via com port
New password	To change the password
Check configuration is valid	Check if the setting is valid
Select directory	Select the directory of setting saved file
Select file	Select the setting saved file to load
Load configuration	Load the setting from computer file
Save configuration	Save the settings into computer file
File selected
Return to main menu

Setup how unit activate from sleeping mode (off line) Setting Parameter Enable By Motion switch only Aux1 only Motion and AUX1 AUX1 only + send SMS if AUX1 changesMotion and AUX1 + send SMS if AUX1 changes Example Co-Response SMS command code 30,x Rover Activation Outcome Motion switch only :default Rover activates using motion switch only Aux1 only:Rover activates only when Control input 2 (Aux Input 1) is low Motion and AUX1:Rover activates when motion or Control Input 2 (Aux Input 1) is low AUX1 only + send SMS if AUX1 changes:Rover enabled by Aux Input 1 only. Automatically sends status when input level changes Motion and AUX1 + send SMS if AUX1 changes:Rover enabled by motion and Aux Input 1. Automatically sends status when input level changes
Example

Co-Response SMS command code 30,x Rover Activation Outcome Motion switch only :default Rover activates using motion switch only Aux1 only:Rover activates only when Control input 2 (Aux Input 1) is low Motion and AUX1:Rover activates when motion or Control Input 2 (Aux Input 1) is low AUX1 only + send SMS if AUX1 changes:Rover enabled by Aux Input 1 only. Automatically sends status when input level changes Motion and AUX1 + send SMS if AUX1 changes:Rover enabled by motion and Aux Input 1. Automatically sends status when input level changes .